Inverter - Electrical
Products: ELECTRICAL ACCESSORIES
INVERTER: Increased or decrease the injection flow of a
MULTIFERTIC Injection Pump through the increase
or reduction of the electrical frequency
Regulation by means of:
* built in potentionmeter
* output signal 4/20 mA - 0/10V
Electric motor over-load protection
Injection flow displayed in l/h
| INVERTER |
| PART NUMBER |
DESCRIPTION |
| 29002 |
230V Single phase, For one MULTIFERTIC pump |
| 29010 |
230V Single phase, For two MULTIFERTIC pumps |
| 29011 |
230V Single phase, For three MULTIFERTIC pumps |
| 29012 |
400V Three phase, For three MULTIFERTIC pumps |
| INVERTER ENCLOSURE PROTECTION |
| PART NUMBER |
DESCRIPTION |
| 29000 |
With 0.7HP three -phase 230 V motor overload protection and CONTROLLER 2000 connection |
| OVERLOAD SWITCH |
| PART NUMBER |
DESCRIPTION |
| 25601 |
Three phase 400 V 50/60Hz 1.6/2.5 Amp |
| 25606 |
Three phase 230 V 50/60Hz |
| 25607 |
Signal phase 110 V 60Hz 0.5 CV |
| 25608 |
Signal phase 230 V 50Hz 0.5 CV |
| OVERLOAD SWITCH BOX |
| PART NUMBER |
DESCRIPTION |
| 25301 |
IP-55 Protection |
| ADDITIONAL VENTILATION |
| PART NUMBER |
DESCRIPTION |
| 27-000 |
24 V 50/60 Hz for a MULTIFERTIC dosing pump |
| 27-001 |
24 V 50/60 Hz for an ELECTROFERTIC dosing |
| 27-002 |
24 V 50/60 Hz for an ELECTROFERTIC dosing pump high pressure.
(Must be installed when the motor works with an INVERTER) |
|
