 |
CHEMICAL INJECTION PUMPS |
|
|
|
 |
|
|
Added ModulesProducts: MODULAR DOSING PUMPS
In our MultiFertic® injection pumps the injector can be connected several injection modules to apportion different products (INDEPENDENT INJECTION) or to increase the injection flow. By increasing the number of modules in the same injector, a higher flow regularity is obtained, whereby in the 4 modules model an actually continuous flow is obtained. Up to four different modules can be added at the same motor, piston or diaphragm:
Diaphragm: Teflon Cylinder: Polyethylene, Stainless steel or PVDF MODULAR DOSING PUMP WITH PISTON
MODULAR DOSING PUMP WITH PTFE DIAPHRAGM MFD
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 230/400 V 50/60 THREE PHASE MOTOR | ||
| PART NUMBER | FLOW GPM |
PSI |
| 62-A11-BFOPN | 7.5 | 145 |
| 62-A11-BFOPN | 15 | 145 |
| 62-A11-BP1PN | 30 | 145 |
| 62-A11-BP2PN | 60 | 87 |
| 62-A11-BP3PN | 90 | 58 |
| 110/230 V 50/60 SINGLE PHASE MOTOR | ||
| PART NUMBER | FLOW GPM |
PSI |
| 62-C21-BQOPN | 7.5 | 145 |
| 62-C21-BPOPN | 15 | 145 |
| 62-C21-BP1PN | 30 | 145 |
| 62-C21-BP2PN | 60 | 87 |
| 62-C21-BP3PN | 90 | 52 |
| ADDITIONAL MODULES FOR MF-PISTON PUMPS | ||
| PART NUMBER | FLOW GPM |
PSI |
| 62-SQO( )N | 7.5 | 217 |
| 62-SPO( )N | 15 | 217 |
| 62-SP1( )N | 30 | 217 |
| 62-SP2( )N | 60 | 116 |
| 62-SP3( )N | 90 | 72 |
| ADDITIONAL MODULES FOR WITH PTFE DIAPHRAGM PUMP | ||
| PART NUMBER | FLOW GPM |
PSI |
| 62-SQO( )N | 7.5 | 217 |
| 62-SPO( )N | 15 | 217 |
| 62-SP1( )N | 30 | 217 |
| 62-SP2( )N | 60 | 116 |
| 62-SP3( )N | 90 | 72 |
website design - web design - webmaster
|
