Multifertic^® Chemical Injection Pumps

The MultiFertic^® injection pump are heavy duty, high precision pumps for chemicals products and additives, made up of one driving module and 1 to 4 injection modules for 25 to 500 l/h. - 7.5 to 150 GPH.

In the same injector can be connected several injection modules to apportion different products (INDEPENDENT INJECTION) or to increase the injection flow. By increasing the number of modules in the same injector, a higher flow regularity is obtained, whereby in the 4 modules model an actually continuous flow is obtained.

Up to four different modules can be added at the same motor, piston or diaphragm:

Piston: Polyethylene or Ceramic
Diaphragm: Teflon
Cylinder: Polyethylene, Stainless steel or PVDF

Advantage of the Multifertic Injection System:

1. Simple manual operation if desired
2. Cost efficient precision injection
3. Multiple pumping capability
4. Independent control of each pumping head
5. Multiple voltage pumps to choose from
6. Multiple heads to choose from ( 7.5 -15 -30- 60- 90- 150 GPH)
7. Easy installation
8. Easy Cleanup (simply flush with water)
9. Full automated controller available
10. Controlled Injection to maintain water Ph
11. Proportional Injection with flow sensor
12. Controlled Injection to maintain EC
13. Tech support available in-house
14. Large inventory
15. Replacement readily available
16. Rebuild shop in-house (normally 1 day service)